 | Introduction:
This process differs from Stamping pins because it’s etching the design on Brass plate by photographic film then applying coloring. Pantone color chart is available to match this process; it also must be metallic line to separate each color. Mostly there’ll be 0.6mm metallic rim to protect the coloring. The thickness doesn’t correspond to the size; the standard thickness is 0.8mm, while it ranges from 0.5mm up to 1.8mm for your options.
Process: Filming ~ Photo Graphing ~ Etching ~ Coloring ~ Baking ~ Stoning ~ Polishing ~ Cutting ~ Soldering attachment ~ Electro Plating ~ Epoxy coating (upon request) ~ Inspection ~ Packing |
